Lib Tech

Lib Tech Cold Brew Snowboard

Multicolour

AU $779.95
Choose size
  • 153cm 20SN038-NONE AU $779.95

    Out of stock

  • 157cm 20SN038-NONE AU $779.95

    Despatched immediately

  • 161cm 20SN038-NONE AU $779.95

    Out of stock

Product Sizing Chart

Colours

Information

Item code: 299033

You can’t go wrong with a Cold Brew in the mountains. This Cold Brew is a high performance all mountain/ freeride snowboard that’s easy to maintain thanks to the sublimated base. It’s directional shape with a low entry nose and set back gives you lots of float in powder. With a slightly wider width this board prevents toe drag and prevents it sinking in the powder. The profile is a perfect blend of camber and rocker for all mountain performance, you get increased pop, power, stability, edge hold, float and control. Lib tech have an environmental focus which flows through the Cold Brew construction, giving you a lightweight and strong board that has had minimal impact on the environment. To give you confidence with every turn the Cold Brew features Magne-traction edges, these small serrations give you maximum hold on ice and hardpack.

Features:
  • Snowboard type: All mountain/ freeride
  • Snowboard ability: Intermediate
  • Shape: Directional shape. Featuring a low entry directional nose and a 1.5" set back
  • Flex: Medium flex, rated 5.5-6.5/10. This flex level gives you a balance of response and forgiveness, ideal for all mountain riding and hitting the park
  • Profile: C2. This profile is a rocker and camber hybrid. Short rocker in the centre with camber underfoot. Rocker between the bindings adds float in powder and edge hold on hardpack. Camber underfoot adds pop and power to the board, camber increases the contact length to give you maximum edge hold and stability.
  • OP construction:
  • Core: 75% Aspen and 25% paulownia. Aspen wood keeps the core lightweight whilst paulownia is a hardwood to increase the strength
  • Fiberglass: Tri-Ax/ Bi-Ax. Bi-Ax fibreglass increases the strength of the core without effecting the flexibility, whilst Tri-Ax decreases torsional twist to create a more responsive board
  • Top sheet: Eco sublimated poly top
  • Base: Eco sublimated TNT base is a low maintenance base that retains wax well to keep you gliding faster and for longer
  • Sidewalls: Internal Birch sidewalls run along the length of the board along the toe and heel edge whilst UHMW sintered sidewalls run along the outside. These sidewalls increase the strength and response of the board. UHMW within the nose and tail deflect impact for a smoother ride
  • Magne-traction 7 serrations along the edge give you maximum edge hold on ice and hardpack snow. This edge gives you confidence going into sketchy terrain
  • Art by: Zimmerman photography

 Dimensions

Length (cm)Nose/Tail Width (cm)Waist Width (cm)Rider Weight (lbs)
15329.7 /29.325.790+
15730.4 / 3026.2100+
16130.8 / 30.426.5110+

The weight guide is low to indicate the minimum weight required 



Eco manufacturing: Lib-Tech boards are made in the Mervin factory in the USA. This factory is the most environmentally friendly factory which is powered with wind and water. The materials have carefully been selected to create an eco-board, made using renewable wood, low voc resin and bio topsheet. During the process of making the snowboard the Mervin factory uses water-based inks and sublimation. Plus, the final coating is no toxic, so it doesn’t run into our water streams and cause damage to the environment. It’s evident that climate change is having an impact on the mountain environment, so with a Mervin factory board to can reduce your carbon footprint whilst still enjoying a well man board which is going to give you a fun ride down the mountain.

Snowboard Profile Hybrid
Snowboard Shape Directional
Snowboard Type All Mountain
Freeride

Product Sizing Chart

Length (cm)
153cm
157cm
161cm

By entering your email address above you explicitly consent for us to hold your data in accordance with our Privacy Policy